pic: 968 - A few unfinished parts

Travis Covington · #1 22-01-2007, 01:30

loading photo ...

Cody Carey · #2 22-01-2007, 01:32

These aren't for CVTs, are they?

Nuttyman54 · #3 22-01-2007, 01:32

those looks like rollers for polycord or something....powered assist ramp? (think conveyor belt)

AdamHeard · #4 22-01-2007, 01:32

This one really baffles me.... Even if you were collaberating that is a lot...

Gabe · #5 22-01-2007, 01:37

They're probably wheels, (my guess is 4") and you're using a new tread material this year.

Stuart · #6 22-01-2007, 01:41

thats a lot of bling!

Jeff K. · #7 22-01-2007, 01:58

Quote:

Originally Posted by Gabe

They're probably wheels, (my guess is 4") and you're using a new tread material this year.

Then where are the hex bores?

Probably pulleys or something for an arm? or an elevator lift?

Gabe · #8 22-01-2007, 01:59

Quote:

Originally Posted by Stonefan5271138

Then where are the hex bores?

Note title of the picture: A few unfinished parts

Jeff K. · #9 22-01-2007, 02:03

Quote:

Originally Posted by Gabe

Note title of the picture: A few unfinished parts

Then they're changing up their drivetrain and going with some bigger hexes for their wheel, since the bores look as if they're 1/2" in diameter at least.

Cory · #10 22-01-2007, 02:12

Quote:

Originally Posted by Gabe

They're probably wheels, (my guess is 4") and you're using a new tread material this year.

You're right on the wheels, but these aren't them

Joel J · #11 22-01-2007, 02:14

NO way I'll figure out what these are.. I'm blinded by the sum, and can't see them apart.

"bore"

Gabe · #12 22-01-2007, 02:14

Pulleys to drive an elevator arm? (Forklift style)

Joel J · #13 22-01-2007, 02:19

woah, no delete button.

Travis Covington · #14 22-01-2007, 02:54

A few hints...

#1 They are 7075 aluminum.
#2 They will be hex broached, but that will NOT make them finished.

Holtzman · #15 22-01-2007, 09:24

My money's on Drive Sprockets for #25 chain. The double ones are for the center wheel, and the single ones are for the front and back wheels.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: 254 and 968 on Newton	alphaone	Extra Discussion	10	17-02-2007 08:28
pic: 968 about to rampcamp	Billfred	Extra Discussion	5	18-01-2007 16:38
pic: Team 968 - 2006 Robot	Travis Covington	Robot Showcase	9	14-03-2006 01:59
pic: 179's Control Box (unfinished)	CD47-Bot	Extra Discussion	14	11-03-2004 10:52
pic: Another Team 968 Teaser....	CD47-Bot	Robot Showcase	30	24-02-2004 03:36