pic: 968 - A few unfinished parts

[Holtzman]

My money's on Drive Sprockets for #25 chain. The double ones are for the center wheel, and the single ones are for the front and back wheels.

[Dan Richardson]

I think the little ones with the rounded edges are the shooter, they fire balls into the goal, and I think the pulley's are for bring the balls to the shooter, with polycord and maybe some of that high traction stuff IFI uses

[chaoticprout]

Originally Posted by Stud Man Dan

I think the little ones with the rounded edges are the shooter, they fire balls into the goal, and I think the pulley's are for bring the balls to the shooter, with polycord and maybe some of that high traction stuff IFI uses

Err dude, that was last year =P

[GBIT]

Yah ....... this year is the one with the innertubes and the "rack".

[Conor Ryan]

Parts of a pulley system that will manipulate your tubes?

[Jeremiah H]

Half of those look an awful lot like our hubs for the KoP AndyMark wheels, and the other half look like pulleys, though they seem small for that application.
Whatever they are, they sure are shiny.

[Ryan Dognaux]

Clearly they're just a bunch of spinning tops that 968 is giving away at competition.

[Dan Richardson]

Originally Posted by chaoticprout

Err dude, that was last year =P

Are.. you .. serious? your not just joking? I uhh.. umm, Ohh jeesh I hope the machine shop is still open!

[Travis Covington]

Originally Posted by Holtzman

My money's on Drive Sprockets for #25 chain. The double ones are for the center wheel, and the single ones are for the front and back wheels.

We have a winner! Smart man.

[Joel J]

Originally Posted by Travis Covington

We have a winner! Smart man.

Is that right?!?

How many teams are involved in this collaboration? Three?

[Madison]

Originally Posted by Joel J.

Is that right?!?

How many teams are involved in this collaboration? Three?

Two -- just the same as last season. There're enough parts for two competition robots and two practice robots.

[Travis Covington]

Originally Posted by M. Krass

Two -- just the same as last season. There're enough parts for two competition robots and two practice robots.

+ 2 demo gearboxes + spares.

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.

[Madison]

Originally Posted by Travis Covington

+ 2 demo gearboxes + spares.

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.

I finally got everyone on my team to stop telling me we ought to have a drivetrain just like 254/968. If they start in on nagging me about practice robots and demo gearboxes, we're going to have to have a talk

[Rafi Ahmed]

Originally Posted by Travis Covington

+ 2 demo gearboxes + spares.

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.

Wow how light is your drivetrain going to be. the 2005 254/60/22 drivebase w/ electrinics was about 55. How much is yours?

[Cory]

Originally Posted by raf4far

Wow how light is your drivetrain going to be. the 2005 254/60/22 drivebase w/ electrinics was about 55. How much is yours?

With electronics, not entirely sure. Especially with the heavy fuse panel and the DIN rail/block assembly.

Without electronics, ~25 lbs