Need help building the rack!

[Elgin Clock]

Originally Posted by itay_ms

Hi, we are now trying to build the rack but we ran into a problem with the units thats written in the field rack fabrication, it says that the length is 14.912' TYP , we are from israel, we use the meters lol can someone help with these units? what the hell is typ?

Thx for reading this

Originally Posted by Katie Reynolds

where on the drawing is "14.912' TYP"?

STOP EVERYTHING!

Ok, to avoid confusion. All dimensions on the prints are in inches. (title block SHOULD say so but doesn't clearly, but since the TOLERANCES are in inches which the title block DOES say, the units are in INCHES. )

The dimension in question is part number 025 The base of the rack.

14.912 Typ = 14.912 inches TYPICAL.

Basically all the straight sides of the Octagon are 14.912 inches (NOT FEET!)

It actually says (14.912 TYP).

All dimensions in Parentheses are reference usually.
So, in this case, an 8 sided Octagon with an overall flat to flat height of 36 INCHES (on the left of the view with the dimensions in question) is 14.912 INCHES TYPICAL across the straight sections.

Please do not build a rack part that is 36 FEET Long!!!