Are Spikes needed with servos?

aksimhal · #1 23-01-2007, 20:07

I was wondering if spikes are needed with servos? If so, I already need 2 spikes for the camera

Thanks,
Anish

EricH · #2 23-01-2007, 20:12

Quote:

Originally Posted by aksimhal

I was wondering if spikes are needed with servos? If so, I already need 2 spikes for the camera

Thanks,
Anish

I believe servos go straight to the RC. They're connected like PWMs, aren't they?

aksimhal · #3 23-01-2007, 20:13

So does this mean I don't need spikes for my servos?

Thanks,

GMAdan · #4 23-01-2007, 20:16

Yes servos go straight to the RC

aksimhal · #5 23-01-2007, 20:19

Thanks,

This saves me a lot of wiring.

Anish

T3_1565 · #6 23-01-2007, 20:20

you do need those spikes for the other motors right?

GMAdan · #7 23-01-2007, 20:21

Yes other motors need spikes or victors.

T3_1565 · #8 23-01-2007, 20:22

ok so if the have victors they don't need spikes. ok (ps. I'm not electronics guy I'm just making sure)

chris31 · #9 23-01-2007, 20:23

Servos go straight to the RC through PWM cables. You other motors should be on a spike or victor though.

GMAdan · #10 23-01-2007, 20:27

For better referance you should go to the electrical part of the hand book in the robot section and look for the wiring diagram.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are Servos Motors?	John Gutmann	Motors	1	30-01-2006 18:41
Why are four states needed with Quadratuer encoders?	Issues	Programming	14	11-11-2005 15:02
Spikes with Motors	GregTheGreat	Electrical	22	11-11-2003 10:25
Can you use the spikes with the globe motors?	Caleb Fulton	Electrical	1	15-02-2003 20:13
Can RC servos be used with EDUbot?	ChrisH	Technical Discussion	4	31-12-2002 01:45