Weight? Estmate weight?

[Beth Sweet]

Let me put it this way. I think putting me on the field would weigh less than the robot we're planning. Can we just ditch a battery or a motor?

[Cody Carey]

We made a custom chassis this year, and when we weighed it, it came to about 42lbs with electronics.

[Dan Petrovic]

We have an estimated weight of 98 pounds and I believe we're at 30-40... or something. That's just the chassis.

I think we're in pretty good shape.

[AustinSchuh]

After finally inputing the correct weight of the CIMs and other motors into our model (Which caused a scare one night when I realized that the weight of the motors were ~3lbs total), we are at 103 lbs without ~4 lbs of chain. I feel much better about the robot's weight this year than last year, where we had to remove 10 lbs of weight on the Thursday of the competition. This should be the first year in my 4 years of FIRST where we add extra weight to the robot instead of frantically take it off.

[Nick 1523]

We've weighed all of the stock parts, frame, and used inventor to estimate weight. We're planning on using the smaller heavier config and weight is gonna be close but I think we'll make it. There's always the hole saw ! But i agree i would much rather add lead weights than end up making swiss cheese out of our bot.