Neon lights for Target Assembly

[Silent_Stryker]

basically, just plug it into the battery. they just used a few modifications to make it more convienent

[AnimeBio]

Ok

[Armando]

If the lights blow up.. it's not my fault!!!

[pheadxdll]

Originally Posted by Armando

If the lights blow up.. it's not my fault!!!

Heh, the design schematics say to put all the lights (8) in a small box and cover it with that white plastic. Ours works great and the camera tracks pretty well with it.

[synth3tk]

Originally Posted by pheadxdll

Heh, the design schematics say to put all the lights (8) in a small box and cover it with that white plastic. Ours works great and the camera tracks pretty well with it.

Same here. We soldered a battery connector to our box wires and used an old one from last year. Works great, and the camera tracks it just fine.

[TomZ]

We connected our light up to a computer electrical supply and are running two lights off of that. Hope that helps, just solder the cables to the connector and plug it in.

[Big-Bird08]

Thanks

[fimmel]

it might be a good idea to add a fuse in the circuit so if anything shorts out you wont run the risk of damaging a battery of possibly injuring someone. some wall or bench top power supplies have built in fuses/ circuit breakers but if in doubt just add a fuse.

/forest