Problem with program uploading

[dcbrown]

"there is suddenly no controller to download code to."

Out of curiousity, how did this manifest itself? Was there an error or did the download just hang or was there some other symptom?

thanks.

[1573]

when im trying to upload the program to the controller the computer isent recognizing the controllers version (2006/2007 controller).
but it does recognizes the 2005 controller

[Mike AA]

Sounds like it may be the same problem I had with the actual controller. I tried our 06 RC and worked fine then tried the 07 and wouldnt work. I called IFI and he went through all the steps everyone on here did and told me to send it in and they'll check it out. I am wondering if part of the processors are goofed up or the actual program input interface.

Oh well now I just wait a few more days to get it back.

-Mike

[1573]

YAI, ok i found the problem.... i tried 3 computers then i tried at home and its works correctly there so the wole problem was the 3 computers. thank you guys for the help

[Mib]

Originally Posted by jesusfreakmths

Do you guys know were I can find the code for the camra. Or any info on how to use it, and see code that can give us an idea on how to include it in the code/recive info from it?

www.kevin.org

click on FRC stuff ("here")

scroll down, and it should be called something like frc_first_camera2

get the bells and whistles if you're doing a lot of stuff with autonomous mode, the streamlined version is ok though

you'll have to upload it to the camera/robot, but after that, the camera should be able to track targets and display feedback