|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#14
|
|||||
|
|||||
|
Re: Manipulator(Arm) Help
From the drawing, im not sure exactly how the heights are going to work out. You say the max. height your robot can reach is 107.67'', which is when your robots arm is completely vertical. To me, that seems fine, as David said, if you pick the tube up from the bottom, you may not have a problem reaching the top spider leg.
From the picture though, the arm is at an angle, making the max. height significantly lower. Is that the problem you were referencing? If so, we can discuss further improvements on the design. ![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Most Impressive Manipulator | santosh | Technical Discussion | 28 | 08-06-2005 22:44 |
| Manipulator designs | Max Lobovsky | Technical Discussion | 10 | 27-01-2005 07:43 |
| I Need Help With An Arm | Team ICE #1611 | General Forum | 4 | 20-01-2005 14:37 |
| anyone use an arm to help balance | archiver | 2001 | 8 | 24-06-2002 02:46 |