Flag at Competitions

[AdamHeard]

If you wanted something narrow with some flexibility in case a robot hit it, mounting it to a piece of pvc would work if no tower/arm was present. This would be pretty rigid, but allow some deformation if a robot hit it. I would mount it on the back or front of the robot near the center on the edge so it would be unlikely to get hit.

[Bongle]

At least one of the ramps posted in the pictures section is bent such that a robot climbing it doesn't actually end up on top of the lifting robot. The lifted robot finishes the match above and beside the lifting robot.

Here is the picture I am talking about: http://www.chiefdelphi.com/media/photos/26538