pic: Team 932

Charger_07 · #1 02-02-2007, 01:01

Charger_07 · #2 02-02-2007, 08:39

Not alot of time left but we are getting there

65_Xero_Huskie · #3 02-02-2007, 08:45

Are you going to be putting sideplates or bumpers or something thicker around the edge, it looks like you will get broken in two if you were to hit any of the biger drivetrains

Molten · #4 02-02-2007, 08:57

I like the design but it would appear that there might a problem with the rule <R12>. How far does it expand?

Charger_07 · #5 02-02-2007, 13:20

Quote:

Originally Posted by 65_Xero_Huskie

Are you going to be putting sideplates or bumpers or something thicker around the edge, it looks like you will get broken in two if you were to hit any of the biger drivetrains

ya, we will use a bumpers, right now we are prototyping it with spare materials before we use our good materials on the final design, it will end up being stronger but we still will use bumpers

Quote:

Originally Posted by Temper Metal

I like the design but it would appear that there might a problem with the rule <R12>. How far does it expand?

it isnt in conflict with R12 it only extends to 57 inches

Molten · #6 02-02-2007, 13:59

That is most impressive. I would have guessed it to be at least 8 feet from the back of the robot to the end of the arm. Congratulations on the design and good luck for the competition.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Team 932 robot	Charger_07	Robot Showcase	6	28-01-2007 19:59
Team 932 video	Charger_07	Robot Showcase	2	22-02-2006 18:46
Team 932 shooter video	Charger_07	Robot Showcase	2	14-02-2006 22:29
pic: 932 Robot base	Caleb A.	Robot Showcase	5	07-02-2006 21:39
Team 932 animation	Ydnar	3D Animation and Competition	10	21-03-2002 22:06