|
|
|
 Mentors may not be the direct focus of FIRST, but they are just as involved as students are. They play a pivotal role in the success of FIRST and of the success of every team. - Dan Petrovic [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Issue with downloading code to the 2007 RC
My team tried to download a program to the RC for the first time today and we kept getting an error saying that the robot was not on, or the serial cable was not connected. But our robot was on and plugged in and in programmed mode. Can any one help?
-Dustin, Team 816 |
|
#2
10-02-2007, 13:05
|
|||
|
|||
|
Re: Issue with downloading code to the 2007 RC
did you check the back up battery the robots some thimes throw a fit when its dead or all most dead
 |
|
#3
10-02-2007, 16:55
|
|||
|
|||
Re: Issue with downloading code to the 2007 RC
Check all of your connction, you may have a dead cord. And make sure that you have all of the proper drives instraled. Also, in the top right corner of the download window, there should be a button to change the com ports, yo can find out which port you need by going to the device manager in the my coputer properties. Check all of that and try it.
|
|
#4
10-02-2007, 17:26
|
||||
|
||||
|
Re: Issue with downloading code to the 2007 RC
Under Build and Download -> Loader Setup is where to change your com ports.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with Kevin's 2007 default code | bruss6 | Programming | 8 | 19-01-2007 15:42 |
| Problem downloading code | Romeo1351 | FIRST Tech Challenge | 6 | 01-12-2006 06:33 |
| Code error on RC after downloading "bells and whistles" version of Kevins camera code | DanDon | Programming | 6 | 10-01-2006 18:07 |
| Downloading Code with new Editor | gburlison | Programming | 4 | 17-01-2003 01:10 |
Linear Mode
