Correct servo part number??

Frank Neuperger · #1 13-02-2007, 03:00

Rule 45 indicates additional HS322-HD servos may be used.

On Page 58/59 of Q and A, GDC indicates that the HS322-HD may be used.

This is confusing because the the sevos that came with the kit are the HS322 without the HD designation.

Does this mean that the camera must be operated with the HS322 but if you want additional servos besides the 2 for the cam, you have to get the HS322-HD?

REgards
Frank

Ricky Q. · #2 13-02-2007, 03:16

I would post that to the Q&A. ChiefDelphi can't give official answers, so all that you would get here are opinions. FIRST makes the final rulings.

Frank Neuperger · #3 13-02-2007, 03:55

First Q and A forum is closed.

Ricky Q. · #4 13-02-2007, 09:54

They are still answering questions as of this morning, are you sure its closed?

Frank Neuperger · #5 13-02-2007, 12:49

Open now but closed to me because I don't have a team password to post in Q and A. I can only post in the other FORUMS. I am guessing by the time I get a Team Password, we may have our bot in a crate.

I was hoping that someone on this site that may have researched the servo part number issue in more detail. may have been able to help out with this.

Regards
Frank

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inventor Part Number question	CraigHickman	Inventor	1	27-07-2006 15:11
Know the part number?	Ryan M.	Lego Mindstorm Discussion	15	27-12-2004 22:43
2002 Kit Hitec Servo Part Number	kmcclary	Motors	6	03-12-2002 11:49
Part Number for Left Hand Screw	archiver	2001	2	23-06-2002 23:35
Fischer Price Part Number?	bmusser	Technical Discussion	0	02-02-2002 12:26