Victor Lights

[Jeremytice]

Yea we had the same problem with our cables in the first couple of weeks. The victors were blinking orange and we found out that 3 of our pwm cables were bad. We are just going to make our own pwm cables like last year. Since we have made them i dont think that we have had one problem with them.

[Donut]

Try making sure it's not the pwm port on the RC either. We had one victor that wasn't working; originally we thought it was the cable, but we switched with a working cable and it worked fine. So then we flipped a cable with a different victor, and huzzah!, the blinking victor worked.

But now the other one didn't.

To us it appears that PWM 2 on our RC isn't working correctly.

[zako]

Originally Posted by Donut

Try making sure it's not the pwm port on the RC either. We had one victor that wasn't working; originally we thought it was the cable, but we switched with a working cable and it worked fine. So then we flipped a cable with a different victor, and huzzah!, the blinking victor worked.

But now the other one didn't.

To us it appears that PWM 2 on our RC isn't working correctly.

It may be the code, If you are running more than 2 motors, i sugesst recoding.