pic: Team 334 3-D #2

Rich Wong · #1 14-02-2007, 15:14

bigboi146 · #2 14-02-2007, 15:15

I really like it a lot. I think you guys made a good use out of the pneumatics.
Good luck and see you all at the regional.

Dave Scheck · #3 14-02-2007, 15:30

Looks good, but there's not a single person in any of those videos wearing safety glasses

karinka13 · #4 14-02-2007, 15:41

Looks like we're using the same drive train.

Are the omnis driven?

Mark Garver · #5 14-02-2007, 16:01

By using just the two pneumatics cylinders for rotation; are you able to hang ringers on all 3 levels of spiders? If so, how do you pick up ringers?

DanDon · #6 14-02-2007, 17:28

Quote:

Originally Posted by Mark Garver

By using just the two pneumatics cylinders for rotation; are you able to hang ringers on all 3 levels of spiders? If so, how do you pick up ringers?

The bottom cylinder is driven on a lead screw track allowing scoring on all 3 levels and picking up off of the floor.

tech91 · #7 14-02-2007, 18:01

Quote:

Originally Posted by dhoizner

The bottom cylinder is driven on a lead screw track allowing scoring on all 3 levels and picking up off of the floor.

You got it!

Josh Goodman · #8 14-02-2007, 20:47

Nice job balancing your robot. At first it looked heavy to one side, but at second glance it looks awesome! Good luck!

waiakea11 · #9 14-02-2007, 21:01

looks cool

Molten · #10 14-02-2007, 21:06

I like what I see. We were discussing something similar originally, however we decided to go with something that we hope will be totally unique.

Bob Steele · #11 15-02-2007, 21:04

Very nice looking robot..
Just don't forget that the robot has a footprint... (including the arm extended) of 72" during play.... if you extend your arm out any length more than you have it in the pic you will be outside of 72" assuming your robot is something around 38 inches in the long direction...

good luck!!!

rachal · #12 19-02-2007, 20:29

very nice! how heavy is your arm?

just wondering, did you get the idea for your drivetrain from 488?

David · #13 19-02-2007, 21:04

your team was nice to you, your robot is fairly flat. My team decided to make everything bunched up

Rich Wong · #14 19-02-2007, 21:14

Quote:

Originally Posted by rachal

very nice! how heavy is your arm?

just wondering, did you get the idea for your drivetrain from 488?

The last time I look they were underweight for their weight/height class.

Their drivetrain is the same one for the last two years so third time is a charm.

tech91 · #15 20-02-2007, 20:12

This year we were amazingly underweight. With our arm folded we fit into the 120lb category.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: SPY Pic on Team 334	Rich Wong	Robot Showcase	0	13-02-2007 14:48
pic: team #2247 come to visit team #383	mayah	Extra Discussion	1	29-01-2007 12:30
pic: Team 188's 2005 Student Drive Team	J Flex 188	Extra Discussion	6	10-04-2005 05:31
pic: Team 1595 Final Robot Rookie TEAM L@@K!!!!	sgsdragons	Robot Showcase	4	01-03-2005 16:21
pic: Team 334 Team Members after the CeBit Convention	CD47-Bot	Extra Discussion	2	29-05-2004 14:14