So who's up late tonight?

[Robo_Coyote]

Madtown is up fine tuning stuff. Our sophomore programmer just turned one of our motors into a 20,000 position servo I’m so glad he knows what he's doing I have no clue freaken genius

[Darkforces]

Ya were running "a little behind" but were going to make it. luckly weve got plenty of the dew to keep us running until we crate this beast up.

[rocknthehawk]

Team 549 is still hard at work....
We got rid of our suction cup earlier, and were working on making our arm better....
We also started re-skining our ramps.

I'm tired....and we are starting early tommorow

[Bongo]

Originally Posted by rocknthehawk

Team 549 is still hard at work....


I'm tired....and we are starting early tommorow

12 o'clock tomorrow is slowly creeping on. I don't think we are going to be able to actually leave. We are all still here trying to finish programming. It's going pretty smooth but there are still a few kinks. We just finished our cart. We ordered pizza, not enough of course, I hope it's enough to keep us going. I want a sobe. We still have to figure out how to get that dang crate outside...

[Robo_Coyote]

Ya were running on Amp we are basically testing and retesting we gotta weigh tomorrow so were crossing our fingers for light weight we were 2 lbs over this mourning. Our programmer is working on his Servo motor thingy I have no clue but apparently we'll be able to click a potentiometer into a position a well be able to be at any of the set heights.

[Barry Bonzack]

left at 4:30 am yesterday... went back at 3pm... left at 11pm... i'll go back at 3 again, and my guess be up for a while.

[=Martin=Taylor=]

We do nearly all our own machining on team 100.

Seeing that we are total noobs, it often takes us unreasonably long times to machine simple mechanisms. It is not unusual for us to work in the machine shop until midnight.

We have been pulling all-nighters since we finalized our design four weeks ago!

It took us a draw dropping 27 hrs of machining to make a simple worm-drive for the big-CIM. There was one night when we worked on it until 2:00 am!

Fortunately, we bolted on the last mechanical component today and it will now be programing's turn to toil into the wee-hours of the morning

[FunkyRatDemon]

We're letting out around 12:00 tonight, starting at 10:00 AM (Mon) till X Tuesday morning (when they come to pic up our 'bot)

(I'm painting the crate and tuning up the mascot suit tommorow! (lucky me)

[UlTiMaTeP]

We left at 2am, back at 9am.

[FunkyRatDemon]

Originally Posted by UlTiMaTeP

We left at 2am, back at 9am.

Now thats effort!

[Robo_Coyote]

Were still here but our whole robot is working freaken sweet!!!!!!!!!!!

[UlTiMaTeP]

I've got to watch the kiddies, skipping classes today for this. My college doesnt count Presidents Day as a real holiday.

[bjimster1]

we're working hard on it as i type... programming a beast

[sanddrag]

got out of the machine shop at 2:30 am yesterday, still awake right now, not fun.

only 6 weeks is too hard on the mentors

[vic burg]

Yuppers!
A few of 108's kids will be packing up the crate tonight and of course making a few adjustments as well before the robot finally goes in!
((I had to make all those silly lists for/of everything so, those will be executed tonight as well))
I can't wait for it!