|
Re: Motors heating up..Plz ASAP
1) Make sure they are not connected directly to the battery. Run them through a breaker panel and speed controller.
2) Make sure they are running in the same direction and not fighting against each other. Do this one by one. Make sure the program is configured correctly for these motors. You can either use two PWM cables or one Y-PWM cable. Either way make sure it is programmed correctly.
That's about it. Although you might have already burnt up your motor. Good luck.
__________________
-= Bharat Nain =-
Whatever you do, you need courage. Whatever course you decide upon, there is always someone to tell you that you are wrong. There are always difficulties arising that tempt you to believe your critics are right. To map out a course of action and follow it to an end requires some of the same courage that a soldier needs. Peace has its victories, but it takes brave men and women to win them. - Ralph Waldo Emerson
|
When I mentor other people in programming... they either get pointers or they don't. - JamesTerm [more] 
21-02-2007, 11:03
Similar Threads
Threaded Mode