So What do you have left to do?

[IndySam]

#1 Use the build windows to make some spare parts.
#2 Screen print shirts and whatever else we can fit in the press.
#3 Make some banners for the pit
#4 Work on scouting system
#5 Work on safety plan
#6 buttons
#7 buttons
#8 buttons
#9 buttons
#10 get some rest (like I can sleep)

[Alan Anderson]

Tweak autonomous during the fix-it window we're using tomorrow evening.

[Vegas]

Sleep....
and get the massive amounts of coffee and energy drinks out of my system

also re-wire the electronics board

[Andrew of FoN]

We still have alot to get done:

Inventor needs to be filled in
Chairmens needs to be finalized
Cart needs to be built
Trailer needs to be modified
Pit layout finalized
Plasma Monitors setup
Pamphlets created
Website updates
Science Fair visit
FLL Tours given
Products labeled


And much more....Should be an interesting two weeks.

[Justin M.]

Before Philly Regional:

Order some parts to fix a broken shaft, as well as stock parts to bring with us
Design and build a pit display
Order team jerseys
Strategy/Drivers meetings
Mess around more with programming
Make travel plans for nationals
Order signage/decals for robot with sponsors

And at the Philly Regional:

Replace broken driveshaft powering our arm
Tweak Autonomous mode
Replace KOP wheels with IFI traction's and Omni's
Attach more signage/decals/sponsor stuff

Not that much to do compared to last year. We just hit a snag yesterday practicing before the FedEx truck and broke a shaft, better now than in the semi-finals I guess. Just a quick swap out of parts, and we'll be good. Should be in at 8:30, swapped and inspected by 9:30, and ready to attend all practice matches from that point.

[lukevanoort]

During a Fix-It Window, I plan to finish the basic autonomous mode so that we just have to set a couple of variables at VCU, as well as polish the arm control routines and joystick smoothing/exponential lookup table set-ups for the teleoperated period.

Originally Posted by 114ManualLabor

114ManualLabor]Thought of another one: Break my body's addiction to caffein. It's to the point where it takes either 3 monsters or about 6 cups of coffee to give me a buzz, and if I don't have any caffeine I get a headache... So it's time to break the habit. This is gonna suck.

Try white, or another rather weak tea. I find that it works wonders for banishing withdrawal headaches. I understand some pain relievers like Tylenol work pretty well for dealing with the headaches too, but I have had little luck with them.

[Tom Bottiglieri]

Write an autonomous command parsing state machine and clean up the wiring when we get to Boston.

[=Martin=Taylor=]

-Make two extra worm drives for spares
-Make a spare sucker
-Get the practice bot working
-Practice

We are also going for gold this rear with our inventor submission. We already have the full CAD done, we just need to add chains, wires, and fasteners.

UPDATE THE WEBSITE! its getting badly behind

[Josh Murphy]

All we have to do is put the bumpers on, get inspected, and attend our practice matches.

[Jack Jones]

We need to get inspected - then go have breakfast!

[astephen68]

We still have to do minor stuff like new bumpers.

[Rick-906]

We need to put something on our ramps for increased traction
and attatch the ramps, and put another hinge on the top of them,
or find some onther way to decrease their height [about an inch over 5']
and if that wont work... we'll figure out some way of raising our wheel clearance..
good stuff, i forsee a busy day in the pits on thursday

we need sponsor stickers too...

[Michael Corsetto]

Heh, I think Manuallabor forgot one slight thing we need to finish. Our autonomous mode. We have a solid 2 CMU camera code and working gear tooth sensors, but we have yet to test the code that links them together. Our programmers will look over the code before PNW, but honestly Thursday is going to be a scramble to get everything working (as usual )

Actually, I just realized we forgot to mount a PVC pipe for the flag. Whoops