|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#15
|
|||
|
|||
|
Re: Team Update 15 - Very important
Quote:
and a receiver close enough in frequency that the transmitter causes the receiver interference problems, you can put them on different antennas and position the antennas to minimize the coupling between the transmitter and the receiver. Given that there is an antenna out of sight in the radio modem case it is very important that the modem be mounted well clear of any metal structure on the robot. We mount our antenna on a piece of polycarbonate a good distance away from metal structure on the robot and have not had any problems with the radio, but we will be first in the line to upgrade the radio firmware, and install V15 of the master code, at Portland. Eugene |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| **FIRST EMAIL**/Important Team Update Posted - could affect your build | Damian Manda | FIRST E-Mail Blast Archive | 0 | 12-01-2007 22:54 |
| New MS Patch.. very important. | devicenull | IT / Communications | 0 | 05-01-2006 18:19 |
| Very Important Rule Clarification!!! | Mr. Mac | OCCRA | 0 | 17-10-2002 23:35 |