pic: Cornelius VIII - FRC469

[Don Wright]

loading photo ...

[Ben Piecuch]

If that performs anywhere close to last years' robot, you'll do very well this year. That ramp looks huge! I'm trying to figure out what the back portion of it does, the side that's mounted near the base of your elevator. Do both the elevator and that fall down to create a longer platform?

On a somewhat non-technical note, what material do you use to cover your bumpers, and how do you print your sponsors and numbers on them?

Looks great, hoping to catch some video of it this weekend.

BEN

[Don Wright]

Thanks...

We got our bumper silkscreened this year. Last year it was a lexan sticker, but that wouldn't conform to the standard bumper rules per the Q&A so silkscreening it was...

Yes, the mast lays down so we expand in all directions... And the mast/arm is actually the front...

[Rich Ross]

Don,

It's a pleasure to see the robot on CD before competitions.

Great work. are you in the 4ft class? Are there "drop-down" casters like 469 has had previously?

On the comment note: Congrats on the new robot. I have a feeling Cornelius will make many friends at GLR (and hopefully not too many enemies)

[Don Wright]

No, no drop-down casters this year...

Yes, we are in the 4ft class.

We hope to make many friends as well. We've made it nice and easy for other robots to climb aboard...

[Rich Ross]

Any chance at a picture of How easy??

[Don Wright]

Unfortunately, no... In 469 tradition, we have to finish something up on Thursday...

[AdamHeard]

looks awesome once again.... Too bad we can't play together until championships .

Being the driver of a rampless robot, I'm really like some of these huge ramps I'm seeing from veteran teams.

[Lil' Lavery]

While the metal grating is ideal for traction-wheeled teams, will your ramp provide any provisions for improving the chances of omni-wheeled teams at getting up?
I can't tell from the picture, but the section of the ramp that deploys from the rear one piece, or does it have a gap in the middle?
Is the device sticking out of the ramp at the rear just to ensure that your ramp doesn't become a "traction device", or does it raise the whole ramp to 12"?
Can you load tubes off the ground, or just the wall?
Is there a camera that I'm missing, is it coming later, or are you guys not using it?
What motors are used where, and are you using DeWalt transmissions again?
And of course, the perennial 469 question, HOW DID THAT MAKE WEIGHT!?!


Sorry for the tons of questions, but 469 is really one of the more inspiring bots every year, and I'm dying to learn more about Cornelius. Good luck, I'm sure you will be a force to be reckoned with at GLR.
Hope you can pull off the ramp-ringer combo, nobody really has yet.

[JackN]

I am so thankful I got you guys in FF

[BRosser314]

Originally Posted by 1derboy

I am so thankful I got you guys in FF

What are you refering to when you say us guys in FF???

[Al Skierkiewicz]

Don,
Can't wait to see it/you in a few weeks. Looks like a winner.

[BRosser314]

Originally Posted by Lil' Lavery

While the metal grating is ideal for traction-wheeled teams, will your ramp provide any provisions for improving the chances of omni-wheeled teams at getting up?
I can't tell from the picture, but the section of the ramp that deploys from the rear one piece, or does it have a gap in the middle?
Is the device sticking out of the ramp at the rear just to ensure that your ramp doesn't become a "traction device", or does it raise the whole ramp to 12"?
Can you load tubes off the ground, or just the wall?
Is there a camera that I'm missing, is it coming later, or are you guys not using it?
What motors are used where, and are you using DeWalt transmissions again?
And of course, the perennial 469 question, HOW DID THAT MAKE WEIGHT!?!


Sorry for the tons of questions, but 469 is really one of the more inspiring bots every year, and I'm dying to learn more about Cornelius. Good luck, I'm sure you will be a force to be reckoned with at GLR.
Hope you can pull off the ramp-ringer combo, nobody really has yet.

No problem about the questions, And yes we were under weight and its our secret, not really but very conservative to some areas you can take off alot of your weight. Thanks for all the positive feedback.

[Don Wright]

We want to keep some secrets... If we tell all, there won't be any interest in us...

[BRosser314]

Don,

what do you think about adding some traction to the ramp for improved traction for those omni-wheeled robots.