Bad Interupt Code

[Ethan Reesor]

When I compile my interupt code with the 2007 library It gives me this error:

H:\Code\Code\user_routines.c:173:Error [1205] unknown member 'INT3IP' in '__tag_223'
H:\Code\Code\user_routines.c:173:Error [1131] type mismatch in assignment

Line 173 is

user_routines.c 173: rc_dig_int02_ip = LOW_PRIORITY;

LOW_PRIORITY is defined as 0 to set the interupt's priority to low
rc_dig_int02_ip is defined as INTCON2bits.INT3IP based on Daniel Katanski's paper "Interrupts for Dummies" (http://www.chiefdelphi.com/media/papers/1483).

Everything works with the interrupt on the first port, and everything everything but setting the proirity works with the second port interrupt.

All of the interrupt code worked with the 2005 library.

I am using MPLAB IDE v7.50