|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Where to buy Freeze spray?
Quote:
I wouldn't worry about it for the competition. We used to use the same stuff when racing slot cars. The motors kept working and running fast with no ill effects. |
|
#2
|
|||||
|
|||||
|
Re: Where to buy Freeze spray?
Jeff,
A few caveats, the heat generated inside the motors won't be cooled very well by spraying the outside. Particularly the outside of the Chalupas. Also be careful as the refrigerant can wash lubricant out of the bearings, especially bronze sleeves. A towel or paper towel, dipped in cool water and wrung out will conduct a significant amount of heat from the motor case, just be sure to keep drips away from the electronics. You also might want to try backing down the motor drive in software, even a few percent could make a difference. |
|
#3
|
||||
|
||||
|
Re: Where to buy Freeze spray?
Re-freezable ice packs work wonders for motors and you don't annoying everyone around with nasty aerosol can solvent smells.
|
|
#4
|
||||
|
||||
|
Re: Where to buy Freeze spray?
Watch for environmental impact to the air in your arena... remember that stuff hangs low in the air.
I like the idea with the ice packs, its a nice safe way to go, also... check around... I think you can get (or make) heat sinks for the CIM motors. -q |
|
#5
|
|||||
|
|||||
|
Re: Where to buy Freeze spray?
Did you mean to have said this? A chalupa is a mexican food. A chiaphua (or CIM) motor is the big black motor (but smaller than it's Fisher-Price cousin) most teams use for drive trains.
EDIT: OK, after a bit of searching, I think I get the joke. FIRST people have a twisted sense of humor. From 2002:Quote:
Last edited by Nate Laverdure : 09-03-2007 at 12:45. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Where to buy T fittings? | jgannon | Pneumatics | 4 | 22-01-2007 17:24 |
| Where to buy sprockets | sdcantrell56 | Technical Discussion | 3 | 19-01-2006 18:44 |
| where to buy cims | Brawler006 | Motors | 2 | 26-01-2004 13:16 |
| where to buy treads? | illumanat'i | Technical Discussion | 11 | 11-01-2004 22:05 |
| where to buy! | Ben Mitchell | General Forum | 2 | 20-01-2002 23:14 |