|
|
|
 anything that breaks a kitbot frame is probably breaking most custom frames of similar weight, too. - dtengineering [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| anything that breaks a kitbot frame is probably breaking most custom frames of similar weight, too. - dtengineering [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
18-03-2007, 16:18
|
||||
|
||||
Re: No RS232 port alternative
Our team had this exact problem and after a bit of troubleshooting it came down to the brand/model of the USB-RS232 (Serial) convertor you use and the way it translate/converts the data in either the hardware (chipset) or software.
Our team has great success with the following adapter(s): Keyspan Serial to USB Adapter http://www.compusa.com/products/prod...to_USB_Adapter Port_Authority_USB_Serial_DB9_Adapter http://www.compusa.com/products/prod..._DB9_Adap ter Also changing some settings in the adapters has helped us improve the speeds to near native Serial speeds. This includes 1. Making sure in the Windows device manager your virtual serial port is SET to the default settings WITH 115,200 baud rate 2. Make sure that FIFO buffers are enabled in the adapter in the driver settings. This is a bit complex but it boils down to the way the adapter negotiates with the RC. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with TTL-RS232 + CMUCam | Shinigami2057 | Programming | 6 | 28-01-2007 08:47 |
| Noisy power supply interfers with rs232/ttl | Mike Mahar | Programming | 1 | 27-01-2007 22:02 |
| Looking for Borrowed RS232 Camera Port Card from BAE Granite State Event | psycho7 | Regional Competitions | 0 | 12-03-2006 13:55 |
| RS232 Radio link | Rickertsen2 | Technical Discussion | 8 | 18-01-2006 12:02 |
| TTL port to a serial port on a demo board | ImmortalAres | Programming | 16 | 09-07-2005 23:44 |
Threaded Mode