|
|
|
![]() |
|
|||||||
|
||||||||
| View Poll Results: What kind of clearance do you have on your robot? | |||
| ~0 in. |
|
0 | 0% |
| <=.5 in. |
|
6 | 9.23% |
| >.5 in. <= 1 in. |
|
10 | 15.38% |
| >1 in. <= 1.5 in. |
|
9 | 13.85% |
| >1.5 in. <= 2 in. |
|
11 | 16.92% |
| >2 in. <= 2.25 in. |
|
5 | 7.69% |
| >2.25 in. <= 2.5 in. |
|
7 | 10.77% |
| >2.5 in. <= 2.75 in. |
|
4 | 6.15% |
| >2.75 in. <= 3 in. |
|
7 | 10.77% |
| >3 in. <= 3.5 in. |
|
3 | 4.62% |
| >3.5 in. |
|
3 | 4.62% |
| I am Attending UTC Hartford |
|
6 | 9.23% |
| I am Attending Championships in ATL |
|
20 | 30.77% |
| I am Attending other regionals |
|
22 | 33.85% |
| Multiple Choice Poll. Voters: 65. You may not vote on this poll | |||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
Robot Clearance
How much clearance does your robot have (meaning from the bottom of the wheel to the next intruding object up...)
Please also select which regionals you have left to go to. Thank you, Jacob |
|
#2
|
|||||
|
|||||
|
Re: Robot Clearance
Sometimes pictures are worth a thousand words.
![]() I voted for between 1" and 1.5"; our 6WD drivetrain and "notched" front corners of our chassis allow our robot to have the ability to climb steeper ramps. We'll be at UTC, and hopefully the Championships. ![]() |
|
#3
|
||||
|
||||
|
Re: Robot Clearance
Our bot in week 3 of build:
![]() There are 8 inches of clearance Currently, we have the electronics and battery suspended about four inches below the chassis, so CoG isn't as bad as it looks in this pic. We can climb 30 degree ramps fairly easily. |
|
#4
|
|||||
|
|||||
|
Re: Robot Clearance
Our ramp scout is in charge of answering this question about all robots on Thursday morning at the competitions....and also providing the information sheet about our robot's ramp and ramp climbing ability to all the other teams.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Think about Robot Ground Clearance | ggoldman | General Forum | 12 | 10-01-2007 08:22 |
| Chassis Clearance | T3_1565 | Technical Discussion | 7 | 08-01-2007 18:02 |
| Minimum Clearance? | Cyberguy34000 | General Forum | 9 | 10-01-2006 11:13 |
| how important is ground clearance? | Zippiot | Technical Discussion | 10 | 16-02-2005 11:56 |
| Victor Muffin Fans - Height Clearance? | Mr. Lim | Electrical | 4 | 28-01-2005 15:32 |