pic: Internal view of the Dewbot

[Martijn]

where did you get those treads?

[Jeff Rodriguez]

Originally Posted by SizzelChest330

and how fast does it go?!!?!?!

16ft/s
http://www.chiefdelphi.com/media/photos/28105?

Originally Posted by Martijn

where did you get those treads?

Snowmobile tread, cut in two.
http://www.chiefdelphi.com/media/photos/28106?

[sanddrag]

Wait, what's this? A robot without the Rockwell Distribution block? And it works!?! No way!!! This is awesome.

Nice work guys.

[artdutra04]

Originally Posted by sanddrag

Wait, what's this? A robot without the Rockwell Distribution block? And it works!?! No way!!! This is awesome.

Nice work guys.

And if you notice, we also found lighter "dualie" Maxi-blocks (at Wal-Mart) for the 40 amp breakers which are MUCH lighter than the one from the KoP.

[whytheheckme]

Originally Posted by sanddrag

Wait, what's this? A robot without the Rockwell Distribution block? And it works!?! No way!!! This is awesome.

Nice work guys.

ROFL... I also noticed that there is no signal light... That thing WILL fail!

And god forbid they use the IFI breaker panel. That would just be bad!

I'm jp. No need to get anyone upset.

Jacob

[skimoose]

Originally Posted by Martijn

where did you get those treads?

The tracks are made from a single Polaris 120 XC youth snowmobile track cut lengthwise in two.

We are running old and very used exide batteries, but we were still getting 30-45 minutes of running time.

We'll try to get some video up at some point.

[Qbranch]

You had to have paralleled those batteries... are you having any issues with the batteries voltage eqalizing (running high current between eachother) when you plug them in?

Usually the only way to stably put multiple batteries in a system is in series.... unless maybe your charging them on the same charger/leave them parralelled at all times?

-q

[Alex Cormier]

How about it actually acting like a cooler? Have a little place for a moeny intake and a locking lid untill money is deposited and out comes a frosty beverage?

[will_freer]

how fast do you change the batterys during matches?

[artdutra04]

Originally Posted by will_freer

how fast do you change the batterys during matches?

This isn't our FRC competition robot, just an interesting off-season project (built to almost FRC-legal standards) that my father and myself built for the team as a public relations robot.

If you look in the main robot picture, there is a front "access hatch" on the robot that uses two polycarb hinges to swing open, allowing for easy access to the batteries and main breaker. This also keeps all the "technical" stuff on the robot hidden from view, which was one of our original design criteria for this robot, as it keeps everyone wondering "how does it do that?!".

[Athleticgirl389]

Originally Posted by artdutra04

This isn't our FRC competition robot, just an interesting off-season project (built to almost FRC-legal standards) that my father and myself built for the team as a public relations robot.

That is just amazing!! Shows pure dedication and love of FIRST to build that... and Mountain Dew none the less haha. I do wish that was your FRC robot though... would love to see that in competition

[Schnabel]

So is the Dew Bot going to be in Atlanta?

[skimoose]

Originally Posted by Qbranch

You had to have paralleled those batteries... are you having any issues with the batteries voltage eqalizing (running high current between eachother) when you plug them in?

Usually the only way to stably put multiple batteries in a system is in series.... unless maybe your charging them on the same charger/leave them parralelled at all times?

-q

Checked the batteries carefully for bad cells, and ran them charging and running as a matched set at all times. This isn't the final wiring, though. I want to add a second main power breaker and run as an "A" battery source and a "B" battery source. The battery access hatch is pretty tight so I'd rather swap sources by opening one breaker and closing the other. Then we can exchange batteries away from the public's view.

[SuperJake]

I think this is awesome for two reasons:

1) It is green and I have a weakness for anything green (Go MOE!).

2) The tracks closely resemble those on my new baby: SWORDS (see pic below).

[skimoose]

Originally Posted by SuperJake

I think this is awesome for two reasons:

1) It is green and I have a weakness for anything green (Go MOE!).

2) The tracks closely resemble those on my new baby: SWORDS (see pic below).

Thanks! We saw SWORDS in action on the "Future Weapons" program. We knew we were on the right track! Pun intended!