Who Has Changed there Robot Design?

[Jeremiah Johnson]

Um... we braced the manipulator some more... that's about it. Welded some pieces on Friday night of MWR. Other than that... not a thing. That I know of. Ed probably has something up his sleeve, I haven't been to many meetings since we got back in town.

[seraphim33]

903 is currently building a new ramp design 4 natonals because it was dificult for teams 2 climb (idk y though) but u will see a n all nw robot in atlanta

[pakratt1991]

I am pleased to say We changed almost nothing
Our robot was functional from the start. only not working once... forgot to locktight something in build season and came back to bite us in the $@#$@#$@#.

only changes we made was switching Aluminum 1 inch ramps for stronger/longer lasting carbon fiber ones.

[cire]

I plan on modifying our gripper a little to make it close / open faster when we get to Atlanta, 3 seconds is just too long

[rees2001]

At FLR we found that we needed to take the camera off so we could put some polycarb on our sides if/when we need to remove our bumpers to ramp. Now we have re-worked the pneumatics to remove the entire mounting plate & one tank so we could re-mount our camera. Now when we get to Atlanta we can have some auto modes that do more than burn a hole in the carpet.

[Wayne Doenges]

We decided to redo our wings. They will be lighter (T6 6061, .032 aluminum) and easier to stay on once you get on top of them. We are adding anti-backing devices and a rubber strip on the edges of the wings.
Here they are: http://www.chiefdelphi.com/media/photos/28047

[RoboMadi]

I don't think 'changed' is a good word...... But I'll say that we have made a lot of 'improvements.'
We have improved our suction, by adding another cup.
We changed the design of our ramps at Chesapeake, but over the course we have improved it and will be adding on to the improvement (new wood pieces, brackets etc etc) at the Championship.

Good Luck Teams, and if you need any kind of help........ANY KIND OF HELP....you guys are always welcome at 612's pit.

Imad

[normanthefatcat]

are we allowed to change our robot now? such as build a new manipulator and then bring it to nationals? 2067 is a rookie team and we were unsure of the rules of such as we had a good idea to change the manipulator but werent sure if we could change it. if someone could email me at nsondej@comcast.net with the answer thatd be great too b/c ill prob lose this thread

[Pat Fairbank]

We just added some strategically placed steel braces to robustify our arm.

[Jeremiah Johnson]

Originally Posted by normanthefatcat

are we allowed to change our robot now? such as build a new manipulator and then bring it to nationals? 2067 is a rookie team and we were unsure of the rules of such as we had a good idea to change the manipulator but werent sure if we could change it. if someone could email me at nsondej@comcast.net with the answer thatd be great too b/c ill prob lose this thread

As far as I know, you can only design changes to be made and bring the materials. I don't think you can pre-fabricate anything, unless it's done in the fix-it window. I'm not too familiar with the rulebook this year, though.

[IndySam]

Originally Posted by normanthefatcat

are we allowed to change our robot now? such as build a new manipulator and then bring it to nationals? 2067 is a rookie team and we were unsure of the rules of such as we had a good idea to change the manipulator but werent sure if we could change it. if someone could email me at nsondej@comcast.net with the answer thatd be great too b/c ill prob lose this thread

email sent

You can change anything as long as you follow the standard build guidelines. The problem is you only get two five hour build windows after every weekend of regionals. So you can have two 5 hour meetings but they have to happen before this Thursday morning.