Go to Post Andy Grady does a great job of running the WayBack machine for us new to FIRST. - Foster [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Spotlight this post!  
Unread 17-04-2007, 18:06
ZachKahn's Avatar
ZachKahn ZachKahn is offline
Team Captain
FRC #1515 (MorTorq)
Team Role: Leadership
 
Join Date: Feb 2007
Rookie Year: 2005
Location: Beverly Hills
Posts: 68
ZachKahn is a jewel in the roughZachKahn is a jewel in the roughZachKahn is a jewel in the roughZachKahn is a jewel in the rough
Re: 56mm Banebot problems @ Championship

We had continuous problems and breakdowns with the banebots transmissions. For example, during a final match in Colorado our bot received a lot of torque from another robot and our transmission broke. We couldn't do anything about it in time and lost the regional... We're switching over to AndyMark or making our own transmission next year. We switched out both transmissions on Thursday in Atlanta and the robot did not break down.

Experienced problems:
  • Rounding out the "double d" plate
  • too much pressure was put on a shaft and the inside was destroyed
  • brass gears were stripped
__________________
Zach Kahn
Team 1515 President
BHRobotics.com - Team 1515's Website
MorTorq TV - Our Robotics TV Show

 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Banebot 56mm transmissions are Available Teched3 General Forum 9 04-04-2007 16:23
Redrilling 56mm Banebot Carrier Plates Teched3 Technical Discussion 2 04-04-2007 15:43
Banebot 56mm gearbox - double D - RELOADED Joe Johnson Motors 82 09-02-2007 14:07
Banebot 56mm gearbox - double D related Joe Johnson Motors 78 31-01-2007 23:55
Attempting to Cut BaneBot 56mm Shaft edthegeek Motors 6 15-01-2007 08:51


All times are GMT -5. The time now is 22:29.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi