The Leadership Setup of your Team

[Vogel648]

Does your team have one or multiple "top leaders" 1
Is it more of a hierarchy or is everyone equal? Explained later
Are there sub-teams and how are they organized? Sub teams: Eletctronics, programming, build, media
Are there specific leaders of each sub-team? Yes
Basically we have a full team leader, who is theoretically in charge of making sure everyone shows up, and leading anything that is supposed to be lead by students. Then there are division leaders(like I am programming leader), who when it comes down to things that are specific to that area are in charge, for instance assigning tasks during build season, deciding what to do for off season projects, and making sure what needs to get done gets done.

For reference I think our team consists of slightly over 20 kids.

[Jeremiah Johnson]

To elaborate more on Nick's post:

Team 648 is made up of about 23 students from three schools.

We used to have a student leader from each representing school (Sherrard, Davenport West, Moline) but recently, post-2005 I believe, we changed it to a single person as the "student team leader." Personally, I don't think this was a great decision because some students can't handle taking care of 20+ students. I liked it more when there were three heads to take care of a problem. Although, not enough responsibility is put on this position.

As for the divisions, we've always had a leader for each of the four team divisions. Our divisions are Build, Media, Programming, and Electronics. Each leader have some specific duties they are to do. I would like in the future years to make more detailed requirements to fulfill these duties.

To get these positions we hold elections. They aren't run the greatest, there was a bit of, what I thought, bribery this year. I've entertained the idea of these students running campaigns.

Good luck with redoing your leadership, hope this helps. If you have anymore questions, don't hesitate to ask here or PM me... I've been through this for 6 years now and I know the ins and outs of team organization.

Jeremiah

[Brian J. R.]

1983's leadership really runs on the positions you are in, for example, this list will run in order from leaders to minions:

1st Coach
2nd President
3rd Pit Chief/Scout Master/Electricians (we view electricians as some what of gods, seeing as how there are currently 2 of the)
4th The people above's second in-commands
5th Minions

Driver and Operator are not ranked, because they are out most of the time and do not make contact with many people but the Pit Crew. Apart from this, Drivers and Operators are ranked a little below Pit Chief but above Scout Master. This is because the Drive Team usually came from the Pit Crew (Dave and I both worked on the bot before we became the drive team) thus they know what they are doing when it comes to the robot and how to repair what is broken.

We follow the rankings quite to the point, if you are above someone in rank, they will follow what you say. Not to say they we are like the army, simply that if the Pit Chief tells you to get out of the pit, you had better listen because he or she probably knows what he or she is doing.

The people who are in higher ranks also are pretty much in full command of what they are doing. Take the Pit Chief for example, he/she will make the rules, regulations, and final judgments about what goes on in the pits, who is in the pits, and any other ruling he sees fit. A rule that was set in place this year was that "there are 4 people on pit crew and only the pit crew and drive team are allowed in the pit ever, so if you are down here and are not on either of those teams, leave now or so help you."

Now, the Scout Master was in full command of that division as well, if you are not on Drive Team or Pit Crew, you where a scout (unless you where the Runner or Mascot, but those simply count as minion) and the Scout Master was the guy you reported everything to, then he reported to the Coach.

We are composed of 3 main teams during the Main season (Pit Crew, Drive Team, and Scouting) and 1 large team during Build Season (this year we had 18, we needed everybody.) Within the team we have smaller divisions such as Graphics (2 people, myself and Tedrick, who taught me what I know) Website (Graphics team and a few parents) and Build Team. Because we are so small, we have many people wearing different hats when they need to be worn. So the Graphics team is also the build team for the drive train.

Please pardon my long winded explanations, but that is our leadership setup.

Brian Richards

[Otaku]

675 has one leader (the team founder/runner) who handles a lot of the behind-the-scenes stuff, outside of the shop.

The students design the robot based off of what we want it to do, plus our capabilities.

In manufacturing, there are subdivisions with their own leaders.



It seems to work out alright.

[Zach Wydick]

Originally Posted by Brian J. R.

1983's leadership really runs on the positions you are in, for example, this list will run in order from leaders to minions:

1st Coach
2nd President
3rd Pit Chief/Scout Master/Electricians (we view electricians as some what of gods, seeing as how there are currently 2 of the)
4th The people above's second in-commands
5th Minions

Driver and Operator are not ranked, because they are out most of the time and do not make contact with many people but the Pit Crew. Apart from this, Drivers and Operators are ranked a little below Pit Chief but above Scout Master. This is because the Drive Team usually came from the Pit Crew (Dave and I both worked on the bot before we became the drive team) thus they know what they are doing when it comes to the robot and how to repair what is broken.

We follow the rankings quite to the point, if you are above someone in rank, they will follow what you say. Not to say they we are like the army, simply that if the Pit Chief tells you to get out of the pit, you had better listen because he or she probably knows what he or she is doing.

The people who are in higher ranks also are pretty much in full command of what they are doing. Take the Pit Chief for example, he/she will make the rules, regulations, and final judgments about what goes on in the pits, who is in the pits, and any other ruling he sees fit. A rule that was set in place this year was that "there are 4 people on pit crew and only the pit crew and drive team are allowed in the pit ever, so if you are down here and are not on either of those teams, leave now or so help you."

Now, the Scout Master was in full command of that division as well, if you are not on Drive Team or Pit Crew, you where a scout (unless you where the Runner or Mascot, but those simply count as minion) and the Scout Master was the guy you reported everything to, then he reported to the Coach.

We are composed of 3 main teams during the Main season (Pit Crew, Drive Team, and Scouting) and 1 large team during Build Season (this year we had 18, we needed everybody.) Within the team we have smaller divisions such as Graphics (2 people, myself and Tedrick, who taught me what I know) Website (Graphics team and a few parents) and Build Team. Because we are so small, we have many people wearing different hats when they need to be worn. So the Graphics team is also the build team for the drive train.

Please pardon my long winded explanations, but that is our leadership setup.

Brian Richards

Going off what Brian said a little bit more, we also have a Vice President who helps the president whenever possible, a secretary to keep track of photos, emails, and any other important documents, a treasurer to keep track of the money coming in. These are just the leadership roles on the team other than the coach. These 4 people will then assign people certain tasks or jobs on the team that best suit their skills and what is best for the team.

-Zach Wydick

[Ben Martin]

Our team has 34 students and 13 mentors. At the head of the team is our lead teacher sponsor, Mr. Ritchie. Our other teacher sponsor, Mr. Wherry, and Chris Fultz also have a large say about what goes on in the team. In terms of students, this year we have two co-captains. Each subteam (maunfacturing, website, programming, electronics, design, publicity, outreach, promotions, etc) has a captain. Other than that, the team is mostly lead by the students who are the oldest or have the most experience with the team.

[65_Xero_Huskie]

Our team is set up to where there is one lead student for each field (Engineering, Public Relations, Scouting, Electrical), and under that we have people who are either experienced or are learning because that person is a senior. We try not to have seniors as people who are leaders because they wont be there next year and that they can do it on their own when they are gone. On Thursday during the championship we had no engineers until lunch time. But our team was able to run under students and we fixed a problem on our robot, got our robot inspected and even played our first practice match (we were the first team on the field by far on thursday). I think that a team should be run by the students and have the adults there to help out.

[Kims Robot]

I did a conference on our leadership bootcamp at the championships. All of the material is posted here.

In short, this year we attempted to give EVERY student some leadership opportunity. Every student was encouraged to lead a fundraiser, demo, community service, subteam or the team. Whether it was a small activity or a year long leadership of the team, they all gained some sort of leadership experience, and it made huge leaps and bounds in building our team and getting students to take initiative.

The way our team is organized officially by our handbook, we have a student leadership group, 2 leaders per class, that I as the team leader work with. Reporting to us are the student & adult leaders of each subteam.

Take a look through our leadership bootcamp material, it might prove useful