Printing in Inventor 2008

[Arkorobotics]

Hey everyone!

Just got into college, and finally able to download inventor 2008! I'm planning on learning inventor. I remember from robotics that when we printed, we printed everything out in dimensions. I just made something in inventor, and when I go to print it only prints an image. How can I get a outline image with dimensions? Sorry if this is a very n00b questions.

[petek]

You have to create a 2D drawing of your part and dimension it. You probably now have a part model (.ipt) and need to create a drawing file (.idw). Very briefly:
1. Go to File-> New -> Drawing to create the blank file.
2. Then, create the base view of your part with the Base View tool and dialogs.
3. Next, change your tool pallet from Drawing View Panel to Drawing Annotation Panel and dimension the drawing.
4. Finally, print the drawing.

To learn how to do all this properly, go to Help -> Tutorials -> Basics -> Preparing Final Drawings and work through the exercises.

Enjoy!

[Arkorobotics]

Originally Posted by petek

You have to create a 2D drawing of your part and dimension it. You probably now have a part model (.ipt) and need to create a drawing file (.idw). Very briefly:
1. Go to File-> New -> Drawing to create the blank file.
2. Then, create the base view of your part with the Base View tool and dialogs.
3. Next, change your tool pallet from Drawing View Panel to Drawing Annotation Panel and dimension the drawing.
4. Finally, print the drawing.

To learn how to do all this properly, go to Help -> Tutorials -> Basics -> Preparing Final Drawings and work through the exercises.

Enjoy!

Thanks a bunch! I am really excited about learn inventor!

Inventor is a great skill to have. If you have any issues or questions when learning it, feel free to PM me or email me or whatever, I'm always glad to help people out.

Posting here is great too, as we have this awesomely supportive community.

[AdamHeard]

Originally Posted by 114ManualLabor

Inventor is a great skill to have. If you have any issues or questions when learning it, feel free to PM me or email me or whatever, I'm always glad to help people out.

Posting here is great too, as we have this awesomely supportive community.

Indeed it is, I find it useful to convey ideas even outside of robotics. Also, my inventor use allowed me to test out of two classes for college next fall.

[Jared W]

I was able to learn Inventor in highschool from my engineering teacher.. which was also my Robotics mentor.

But listening to conversations, it seems that a knowledge of Autocad is sufficient enough for engineering majors.

Will the transition be easy from Inventor to Autocad?

[AdamHeard]

Originally Posted by Jared W

I was able to learn Inventor in highschool from my engineering teacher.. which was also my Robotics mentor.

But listening to conversations, it seems that a knowledge of Autocad is sufficient enough for engineering majors.

Will the transition be easy from Inventor to Autocad?

Autocad? I didn't know they still used that in college, I'm going to Cal Poly San Luis Obispo next year and they insist on solidworks. I know a long time ago they used autocad, but solidworks is what they have now. I may be mistaken, but I doubt many colleges still run autocad.