Running Multiple Robots with the old Radios

[cbale2000]

Originally Posted by Jack Jones

http://www.chiefdelphi.com/media/papers/1636

Thanks, I'll take a look at that

Originally Posted by Al Skierkiewicz

Chris,
You said that you were using old radios but you didn't indicate which rd/oi combinations you were using. New hardware is not compatable with the older radios. You need to check on the IFI website for info.

The radios, RCs, and OIs are the originals for their robots (IE, yes the 2006 RC and OI are paired with the 2006 Radios).

Originally Posted by Alan Anderson

Ah, but have you succeeded in changing the channel number?

With the more recent OIs (2005, 2006 and 2007 versions) you need to set the leftmost team number switch before the channel select switches will do anything. That means you'll be using a team number greater than 2048. The document Jack pointed to gives the details.

Older OIs (2004 and earlier) need the "practice" pin on the competition port connected to ground in order to enable the alternate radio channels.

Well, I can't tell for sure, but I do know that the robots (2005 and 2006) do work independently from each other, either of them also can work at the same time as the 2007 robot, however they cannot work with each other (2005 and 2006 both running at the same time).

I was never sure if the channel ever changed seeing as the C# on the OI stayed the same.

I will have to try the leftmost team number switch as I don't believe they are set that high.





Thanks for the advice!