Electronics Boards Designs/Ideas

[ADZDEBLICK]

10 vics
4 spikes
14.5x10.5x2.5

http://www.flickr.com/photos/15636395@N06/1677872578/

[BlackShadowFox]

nice board, but where is your controller?
a little bit cramp but still a great looking board.

[eshteyn]

WOW, i look at all the designs and they are amazing. My boards don't look like that, don't get me wrong my boards look very very neats and everything is arranged in the optimal positions, but what you guys do is just artwork.

[ADZDEBLICK]

Originally i had the controller mounted above the fuses, but i took the controller off so it could be mounted separately. This would make it easier to change fuses and to wire neatly. I could always turn the board upside down and mount the controller on the bottom (which would then be the top)

[JesseK]

Originally Posted by ADZDEBLICK

http://www.flickr.com/photos/15636395@N06/1677872578/

Terribly overcramped, but that's a worse-case scenario with 10 victors. I think most teams could get away with 6ish victors depending on the manipulator. I never really thought about separating the RC from the rest of the Electronics board, that's not a bad idea considering 1885 is think up new frame concepts right now. The hardest part has always been the eBoard, battery & compressor mounts.

[Wayne C.]

how do you make your electronics board?

just keep programming the same old thing every time over and over and over....