|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#18
|
||||
|
||||
|
Re: Cool Frame Ideas?
Last year with 1493 we built a custom frame, the sides contained the transmission (a custom 2 speed based off the AndyMark shifter) and the wheels, the two sides were connected by 1 inch square tubing with 1 inch solid aluminum cubes welded on the ends. We threaded the cubes and connected the sides with counter sunk bolts. this allowed us to quickly remove one entire drive module and replace it with a spare. Allowing us to make repairs without having to miss matches of work directly around the robot.
I am going to attach a picture of the chassis, if you have any questions feel free to ask. ![]() Last edited by JamesBrown : 11-11-2007 at 20:32. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| the frame | kaboose | Technical Discussion | 7 | 11-01-2007 22:38 |
| Riveting up a frame | Billfred | Technical Discussion | 27 | 19-12-2006 19:49 |
| Cool new ideas for FIRST Robots - who has them? | sanddrag | General Forum | 44 | 04-08-2005 15:02 |
| Voltage on Frame | Greg | Electrical | 31 | 02-03-2004 13:49 |
| Frame connections | manleycor | Technical Discussion | 15 | 18-11-2003 01:14 |