Israeli teams and Omni wheels

[joeweber]

We used all omni wheels on our 2004 and 2005 robot. The omni directional robot was fun to drive but students had a hard time controling it in competition. It has alot of potential a long as you have a good programer and good drivers. Pictures http://team1322.org/pictures.htm Other tips for them http://team1322.org/omni_drive.htm

[FunkyRatDemon]

Hello

Team 753 (and 997 and 1 more team) use tracks from Outback Mfg.

Just a warning, tracks will push Omni-wheels all day long...and a good Track'bot will go about the same speed too.

In UC Davis Sacremento and NW Pacific (Portland, OR) Regionals we moved other 'bots the entire time

997 even won both regionals last year!!!

[joeweber]

Depends on the size of the tracks. Theirs alot of hardware for a good track design, and you have to keep the power up so you can turn it. When we used the Omini directional drive it was easy movement for the motors. If some one wanted to push us, with a quick thrust of the joystick you move sidways and forward and your around them in seconds. No need to push.
check the vidio out at http://team1322.org/tech_tips.htm

[AdamHeard]

I've seen very few Omni wheels commercially available. In my searching before I have found some all plastic ones in smaller diameters that I have seen some teams use, but nothing on the level of quality of the AM wheels. Unless a new dealer pops up in israel, your best bet is to just order from AM.