paper: Richard's Top Ten Boneheaded Mistakes

[Richard Wallace]

Thread created automatically to discuss a document in CD-Media.

Richard's Top Ten Boneheaded Mistakes

[Rich Wong]

This is a great presentation for all FRC Team!

I'll have Pthe olytechnic University students include this presentation in their NYC FRC FIRST Workshops (happening right now!).

Thanks Richard.

[Cynette]

Excellent, just Excellent!

Hey Every-Team! Read This!

[JohnBoucher]

Sweet

[Elgin Clock]

Screw that tether on good and tight!

–

No, don’t. Remove tether screws from the robot end, so it will self-protect
by pulling loose if the robot gets away while you are testing.

Best advice in that paper IMHO.

Listen and take note of this people, unless you want to spend another extra $1000 on an RC with just one slightly damaged part (tether connector).

Although, if you have an extra $1000 laying around, feel free to tighten your tether cables and learn for yourself.

[wendymom]

I know what we are doing for our next meeting!!! Thanks RIchard

[Dave Flowerday]

Originally Posted by Elgin Clock

Best advice in that paper IMHO.

I'd take that one step further: even when the tether isn't screwed in, it could still rip the port off the RC if the cable gets pulled away at the wrong angle. We've gotten in the habit of looping the tether and programming cables once around a solid piece of the robot (usually our frame) before connecting it. It's a good idea to do that on the OI/computer side as well (don't want your OI or laptop being yanked off the table!). This way, if the robot takes off, the cable will get stretched tight against the frame. The cable may be damaged, but at least the tether/program port wasn't ripped off your $500 RC!

One thing I'd add to the presentation (didn't see it in there but I just skimmed it): make yourself a "robot disable" dongle (or buy one from AndyMark)! No OI should ever be without one. We attach ours to a piece of velcro and keep it with the OI at all times.

[FourPenguins]

Richard, it appears that this was originally in the form of a powerpoint or similar presentation. Are you planning to make it available in that format?
I'd love to present this to my team

[Richard Wallace]

Originally Posted by FourPenguins

Richard, it appears that this was originally in the form of a powerpoint or similar presentation. Are you planning to make it available in that format?
I'd love to present this to my team

Some folks have requested the PowerPoint (.ppt) version of this presentation. In its original form it was about 20MB, but when I stripped off some images and included them as separate JPEGs the total size was only about 400kB. The stripped .ppt file and three .jpg files have been added to CD Media. Please use them and let me know how it goes with your team or local audience.

[Dan Petrovic]

Now... to plan when we can show this to our team.

We can relate to several of these....

...and you bet we learned how to avoid making those mistakes again!

I just can't wait to hear our software lead say "I told you so"

[JaneYoung]

the tether....a very scary oops.

[Guy Davidson]

This is a very well done paper that hits the issues right on the head. We'll be sure to show it to our team and hopefully learn from it.

[Bob Steele]

By the way,
To repair the tether port costs $100 and about 10 days of time to IFI and back.
I know ... I have a receipt...

R

[techtiger1]

Bob thats a true story too, 1251 has one of those receipts too never made that mistake again. Richard great compulation of thoughts and ideas very well presented. Thank you. I will certainly take the time to hand these out before kickoff to every student, veteran or not. Actually some of the mentors could probally use this one around too. =).

[Sunshine]

Awesome,

This will be shown at our next meeting