|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Kickoff Procedure?
We all gather at the kickoff location to watch the webcast. After the webcast the students have a brief meeting with some of the mentors and we talk about the game, past robots, and possible ways to complete the task.
Right after this period we usually split up into groups and discuss robot ideas over lunch. Right after lunch we usually gather and our whole team has to COMPLETELY AGREE on EVERY part of our robot, so if I want a crab drive along with 99% of my team, I will have to convince the remaining 1% to convert OR the other person would present their argument and would either sway us over or we would eventually sway them over. Than after we have each system figured out we decide who is going to be on what part of the team: controls, programming (formerly a subgroup of controls), upper body, and base. After we break up into these groups and start our building. |
|
#2
|
|||||
|
|||||
|
Re: Kickoff Procedure?
Historically, we've all gotten down to USC, watched the Kickoff, collected the kit, inventoried it, printed off the manual, and had everybody scamper and start reading and thinking.
This year, with the move to Clemson, the four members of the team going will all pile in the Billfredmobile at about 6:00 AM (if not earlier), drive two hours to the Kickoff, collect the kit, and go from there. |
|
#3
|
|||
|
|||
|
Re: Kickoff Procedure?
I will attend the kickoff in Columbus Ohio which is a four hour drive and then return to meet with team leaders to inventory and print manual. We meet as a team after school on Monday to start everything rolling.
|
|
#4
|
|||||
|
|||||
|
Re: Kickoff Procedure?
Pre kickoff week:
Make sure 100% that all simple and basic (yet important tasks) (to be expanded in a moment) are done: - Team Mangment: The sub-teams and members, mentors and parents know everything that needs to be known (roles, missions, deadlines, application and tools to use etc.) - Equipment: Make sure the lab is secured and has all the basic required equipment (computers, drills, saws etc.) - Get ready for kickoff: Make sure place to watch kickoff is secured, be it at another team's school auditorim or at one of our members house. Make sure papers, pens, pencils, clipers, ink, printers, scanners etc. are preparid, as well as food (a couple of snacks and sodas about 60 small sand' and 7 1.5Lt drinks). Kickoff day: If at another team's place, get there an hour or two before (with coordination pre-event). If at our own member's house, the member must make sure a day before/ on the day of the kickoff that the NASA TV webcast works (with the screen that the team will be watching). Members will come to either of the two places before the kick off (which usually begins at 17:00 Israel time (atleast that's what it was last year)) make sure that preperations for sitting places, the food, drinks and rest of the equipment are set. - Once all members are present, a short rebriefing of what's going to happen, what to expect and what should every member do along the kick off viewing. - Watch kick off till it's end. Notes to be taken. - Once password is out, print all of the important documents first (The robot, The game, The arena, The tournament and others). First copies of the documents will be given to (a) specific sub-team(s) to go over them. After there are enough copies of all the important documents, give them to each sub-team, to start looking for important notes, rules and missions for each sub-team. Info will be shared in between. That's where the Brainstormin starts. Strategy starts straight away with understanding the game fully, overviewing the kickoff videos (the animation and demonstration) and working on game strategies (whatever the sub-team can do. It's very probable that they'll continue their work the following day after the Israeli Kick off). Some teams that their work won't be much of a nessecity for the following 12 hours will build a minature model of the field (arena, game peices and robots). The other sub-teams take the notes from the important documents about their own sub-team. They will work on understanding the notes and discussing details related to their role, in relation to that note (meaning, if a role says this part is not allowed, they should disscuss what that means and what can they do). Israeli Kickoff: This year, we're really (no kidding) close to the FIRST Israel office, so we'll be helping with the volunteering for the kick off, the registartions of the teams and their receiving of the kits. We'll get our kits, walk (yep, it's that close) back to the lab, open the kits, check all the parts are there, intact, no sirious damages and are approved to work with. The deal should take no more than 2 and a half hours and by then, the strategy sub-team and other mechanical teams will be working on planning the designs. From there on, it'll be telling our whole build season schedule. Nir. P.S Sorry if it's too long ![]() Last edited by Bomberofdoom : 18-12-2007 at 11:13. |
|
#5
|
|||||
|
|||||
|
Re: Kickoff Procedure?
190 typically sends a group to Manchester to attend/present workshops, go to the founders reception and watch the live kickoff. The rest of the team is back at WPI watching the webcast. Following that, those at WPI immediately begin straightening up the lab and preparing for the arrival of the KOP.
When the Kit arrives, a few people split off to build an approximately 1:12 scale field, while the rest inventory parts. Then we go play CRUD The following day, we meet just before lunch, review the game release video, eat and then being brainstorming 971 sends 4 members to the local San Jose kickoff to watch the webcast and pick up the KOP. The rest of the team wakes up later and joins the returning 4 at school to view the kickoff video and begin KOP inventory and brainstorming. Somewhere mid-Sunday I put a long-distance call in to 971 to discuss anything I've learned about the field and how it moves/reacts/works, and answer any questions they might have about it. |
|
#6
|
|||||
|
|||||
|
Re: Kickoff Procedure?
Watch kickoff at a remote location with other teams. (We usually host.) Sit down with anyone else who wants to and do a little "what stands out to you" session. Break for lunch. Spend the rest of the day playing the game with humans as robots (full scale, if possible) and strategizing, after a full reading of the rules. Repeat the next day, and try to narrow down how to win. Ideally, we figure out how to win in the first couple of days. Oh yeah, and inventory the kit somewhere along the line.
|
|
#7
|
|||||
|
|||||
|
Re: Kickoff Procedure?
We usually send 4-5 people to the remote kickoff at San Jose State (Teacher, myself and other mentor, and 1-2 of the top students)
The rest of the team meets us back at the school where we inventory the kit, and then talk about student contracts, rules and guidelines for working in our lab, procedure to gain access to NASA, etc. Then we show a tape of the kickoff, explain the game details to anyone who has questions, and begin brainstorming of basic robot strategy. We stress that this point is not where you say "I think we should have a double jointed arm that picks up the tubes like this and puts them on like so" but rather figure out WHAT we want the robot to do. How comes later. After that we bring a smaller group of students to our lab at NASA to begin building the field, and brainstorming specifically how to accomplish game challenges. In the past two years there hasn't been much debate as to what the best way to play the game was, so immediately after returning to the lab we got into the specifics of how to do things. It sounds like a lot of teams don't work too much on Saturday. We go straight from 6 AM to pretty deep into the night. I think we all got tired and went home at 11:00 or midnight last year. |
|
#8
|
||||
|
||||
|
Re: Kickoff Procedure?
A few members of our team go up to Richmond to attend the kickoff there and pick up our kit, and the rest of the team meets at one of the schools we're based out of and watches the kickoff on TV; after the kickoff is over we brainstorm and eat lunch (always pizza). In previous years, Sunday was not used and we started to refine ideas on Monday with the goal of completing the design by the end of that week. (didn't work out last year, somehow we overlooked the 72x72 rule and discovered on Thursday that our design wasn't legal. That forced us to start over, after a fashion. (the idea remained the same, just drastically different proportions)) This year, we will have a limited Sunday meeting (experienced build team members only) to refine the concepts from the Saturday brainstorming and do a more in-depth analysis of the game in order to go into the build season with a better idea of where we are headed.
|
|
#9
|
|||||
|
|||||
|
Re: Kickoff Procedure?
The team will go to the remote kick off at IUPUI while I and my son go to the kick off in Kokomo to collect the kits for us and a couple of other Indy teams.
The team breaks for lunch while one group scurries to print the manuals. We will meet up again after lunch at school and strategize until 4:00 or 5:00. This year we are going to coble up whatever simulation we can of the field and try to play the game with human as robots. We rest on Sunday (that’s the theory I can never not stop thinking about the game) and hit the ground running on Monday afternoon. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rendering procedure and questions | wt200999 | 3D Animation and Competition | 17 | 10-02-2007 22:43 |
| FIRST Kickoff/Remote Kickoff Info Now Up | Ricky Q. | General Forum | 13 | 25-10-2005 16:34 |
| Visualisation entry procedure & forms | thoughtful | 3D Animation and Competition | 0 | 16-02-2004 23:33 |
| Standard Operating Procedure | K. Skontrianos | General Forum | 7 | 01-03-2003 14:02 |