|
|
|
 I'm all for an aggressive game, but lets not crack each others lexan. - Molten [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I'm all for an aggressive game, but lets not crack each others lexan. - Molten [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
18-12-2007, 18:33
|
||||
|
||||
|
Re: What is the best place to mount CIM motors...?
REMEMBER! Placing a motor is not just a mechanical consideration!
If you will be using encoders on your drivetrain, be wary of scary electro-magnetic fields created by motors and high currents. Especially if you are using analog encoders (aka limitless potentiometers) keep your motors and their wires as well separated as possible from the motors, and remember to use shielded cable for sensors in high emf areas. -q Last edited by Qbranch : 18-12-2007 at 21:15. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| your thoughts on the FP CIM/2.5 CIM motor drive setup versus 2 2.5 CIM motors | waialua359 | Motors | 11 | 14-12-2007 04:29 |
| Where to get the CIM motors? | PlasmicDragon | Motors | 5 | 22-01-2007 14:03 |
| 2 CIM motor mount 56 mm banebox... | brennerator | Inventor | 2 | 19-01-2007 07:57 |
| Large CIM Motors - Removing the sprocket | PuiChi | Motors | 5 | 13-01-2006 16:01 |
| Do the CIM motors emit a magnetic field? | JulieB | Motors | 17 | 27-01-2005 12:59 |
Threaded Mode