|
|
|
 You want to make sure you got a Mike Walker and Billfred at your event so the field runs very smoothly throughout the day. - Arefin Bari [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| You want to make sure you got a Mike Walker and Billfred at your event so the field runs very smoothly throughout the day. - Arefin Bari [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: What is the best place to mount CIM motors...?
We are going to use transmission output direct-drive to axle of middle wheel. We are also going to use 80/20 to build our chassis this year.
|
|
#17
27-12-2007, 10:38
|
||||
|
||||
|
Re: What is the best place to mount CIM motors...?
Quote:
AM Supershifter /w output shaft extension /w optional gear set to set ratio for direct drive of 6" wheel. Seems to be a popular design idea this year. I developed this idea after viewing one or two like this idea. |
|
#18
28-12-2007, 20:10
|
||||
|
||||
|
Re: What is the best place to mount CIM motors...?
If all six wheels are powered (which it sounds like they are) then they should function (kind of) like tracks. For the past six year our team has built tracks and we always put all drive CIMs at the rear of the robot, if for no other reason that there was room there. (we put the battery there too, same reason). It also makes them pretty accessible, because most teams put articulators in the center, not back.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| your thoughts on the FP CIM/2.5 CIM motor drive setup versus 2 2.5 CIM motors | waialua359 | Motors | 11 | 14-12-2007 04:29 |
| Where to get the CIM motors? | PlasmicDragon | Motors | 5 | 22-01-2007 14:03 |
| 2 CIM motor mount 56 mm banebox... | brennerator | Inventor | 2 | 19-01-2007 07:57 |
| Large CIM Motors - Removing the sprocket | PuiChi | Motors | 5 | 13-01-2006 16:01 |
| Do the CIM motors emit a magnetic field? | JulieB | Motors | 17 | 27-01-2005 12:59 |
Linear Mode
