Quote:
Originally Posted by Chris_Elston
Richardmcc2,
Is that because:
1. Your remote control is repeatedly sending a signal to the IR controller?
The remote control we are using only sends one IR command per-press of the button, even if you hold it down for any length of time.
|
I would assume it's repeatedly sending the signal.
I have tested two different remotes with our board. One was a cheap DVD remote that only sent the signal once. The second repeatedly sent the signal. If you read the IR manual it talks about using a remote that repeatedly sends the signal.
Do not treat Vex and FLL as inferior because they may not get as much exposure as FRC on these boards. Just remember, FLL has seven times more teams than FRC from twenty additional countries. - artdutra04 [more] 
Threaded Mode
