3pin RS232 port doesnt work on camera. can't debug while connecting through the DB9.
Hi Everyone,
I have used Kevin's (thanks Kevin!) serial port diagnostic utility to find the problem with our camera. it seems that the 3pin connector on the camera is faulty and thus I can't use the TTL port to connect to the camera.
On the other hand I can't make sure it's all working while connecting the camera to the programming port through the DB9 cable, because the programming port is taken up....
Any Ideas on how I can debug the camera with the terminal while connecting it through the DB9 cable?
Thanks!
-Leav
__________________
"We choose to build robots this season and do the other things; Not because they are easy, but because they are hard." -Paraphrasing JFK
Participated in FIRST as a student: 2005-2006 (But still learning every season!)
Mentor: 2008 - ? (Team 2630 2008-2011, and Team 3316 since 2013)
Engineer: 2011 - ? (B.Sc. and M.Sc. in Mech. Eng. from the Technion IIT)
FIRST Volunteer - 2007 - ? (MC, FTA, FIRST Aid etc.)
|
People in FIRST ARE lucky, because they are living a very creative adventure which just doesn't let up, and that is okay. Who wants to sit there watching TV and being a spectator anyway. - DougHogg [more] 
Similar Threads
Threaded Mode