Dual Robots

[Kiwi]

<R09> Each registered FIRST Robotics Competition team can enter ONE (1) ROBOT into the 2008 FIRST Robotics Competition. That ROBOT shall fully comply with all rules specified in the 2008 FIRST Robotics Competition manual.

<R12> When determining weight, the basic ROBOT structure and all elements of all additional mechanisms that might be used in different configurations of the ROBOT shall be weighed together. Included in the weight limit are the robot control system, back-up 7.2V battery,
decorations, and all other attached parts.
Example: A team has decided to design their ROBOT such that, before any given MATCH, they may change the configuration of the ROBOT based on perceived strengths or weaknesses of an opponent. The team accomplished this by constructing a basic drive train platform plus two versions of a GAME PIECE manipulator, each manipulator being a quick attach / detach device such that either one or the other (but not both) may be part of the ROBOT at the beginning of a MATCH. Their ROBOT platform weighs 107 lb, version A of the manipulator weighs 6 lb, and version B weighs 8 lb. Although only one version will be on the ROBOT during a MATCH, both
manipulators (and all components of the manipulators that would be used during the MATCH) must be on the scale along with the ROBOT platform during weigh in. This would result in a rejection of the ROBOT because its total weight comes to 121 lb.

<R113> If a team makes a modification to the ROBOT after it has passed inspection, that must have the ROBOT re-inspected. If an observation is made that another team’s may be in violation of the robot rules, please approach FIRST officials to review the question. This is an area where “Gracious Professionalism” is very important.

<R114> At the time of inspection, the ROBOT must be presented with all MECHANISMS (including all COMPONENTS of each MECHANISM) and configurations that will be used on the ROBOT during the entire competition event. It is acceptable, however, for a ROBOT to play MATCHES with a subset of the MECHANISMS that were present during inspection. Only MECHANISMS that were present during the inspection may be added, removed or reconfigured between MATCHES. If subsets of MECHANISMS are changed between MATCHES, the reconfigured ROBOT must still meet all inspection criteria.

As long as you started with one bot that passed inspection and removed mechanisms before matches, I don't see why it wouldn't work.

<G44> Detaching MECHANISMS - ROBOTS may not intentionally detach parts or leave multiple mechanisms on the TRACK. Violations will result in a PENALTY per incident. If an intentionally detached component or mechanism significantly impedes access to the TRACK or an ALLIANCE ROBOT, the offending ROBOT will be disqualified from the MATCH.