|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
|
|||
|
|||
|
Re: How to get the ball over the overpass!?
springs or momentum type *throwers* probably will have trouble getting past inspection because so much energy will be required, and it becomes very unsafe. Last year springs were used on our robot as a buoyant force so we could easily raise and lower our ramps, not in a way to rapidly release all that potential energy.
also is... <R60> Items specifically PROHIBITED from use on the ROBOT include: Electric motors and/or servos different from, or in addition to, those in the Kit Of Parts, with the exception of those specifically permitted by Rule <R59>. Electric solenoid actuators (note: electric solenoid actuators are NOT the same as pneumatic solenoid valves – the latter are permitted, the former are not). ...why those firgelliautos actuators are definitely NOT allowed? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Throwning the ball over the over Pass | eastsideboma | Rules/Strategy | 16 | 15-01-2008 12:56 |
| How do you get your other ball | Jeff 801 | Rules/Strategy | 80 | 07-01-2008 17:59 |
| pic: Dimensions of the Trackball on the Overpass | Bethany Mc. | Extra Discussion | 2 | 07-01-2008 09:01 |
| How to filter the points to get only the left most and right most? | tommy_chai | Programming | 2 | 28-11-2007 11:39 |
| Height of the bar over bonus ball structure | punarhero | General Forum | 3 | 17-01-2004 14:39 |