gearbox 2008

[mahmosh]

hi all ... this is the first time i write on this forum ...
and i want to ask about the gearbox 2008 ... how we can assemble the gearbox with the chassi ... becuase there is no place to put the screws like the gearbox we use in 2007... i am waiting for your answers ...
thanks...


here is our website : www.tamra-afr.net

[EricH]

Originally Posted by mahmosh

hi all ... this is the first time i write on this forum ...
and i want to ask about the gearbox 2008 ... how we can assemble the gearbox with the chassi ... becuase there is no place to put the screws like the gearbox we use in 2007... i am waiting for your answers ...
thanks...

There should be four unused plates in the kit chassis box. 2 will be large, angled things, and two will look almost like the frame stiffeners. The large plates are for the top and the small angles are for the bottom.

[mahmosh]

thank you EricH ... but can u give picture for this plates ? cuase i didn't understand what do you talk about ... and thanks again

[EricH]

Originally Posted by mahmosh

thank you EricH ... but can u give picture for this plates ? cuase i didn't understand what do you talk about ... and thanks again

I don't have a picture, but the larger plates have three circles above a large slot. The smaller ones look like "angle iron". They should be in the Kitbot box.

To assemble, the "angle iron" attaches to the gearbox on the bottom and the large plates go from the top of the gearbox over the chain to the kit frame.

[mahmosh]

do you talk about this parst ? (in the attachment files) ...

[EricH]

Originally Posted by mahmosh

do you talk about this parst ? (in the attachment files) ...

No. Those are the side plates for the gearbox.

[mahmosh]

sorry for asking alot ... but its our problem and i have to solve it today ...
look at the atachment and tell me if this parts you talk about ...

[EricH]

Originally Posted by mahmosh

sorry for asking alot ... but its our problem and i have to solve it today ...
look at the atachment and tell me if this parts you talk about ...

Bingo. The one on the left goes against the top; the one on the right goes on the bottom.

[mahmosh]

thank you mr.EricH for helping me ...

[LSC Darkside451]

This should help you on how to mount it. Looks like it attaches right to the rails on the sides of the frame.

http://img525.imageshack.us/img525/5550/78462919yn5.png


Best of luck!

LSC Darkside 451

EDIT: My mistake. I got my inside and outside messed up in that pic. Check out IFI, they have the PDF for it there now.

[mahmosh]

thanks alot for helping LSC Darkside451