|
Re: rules and chiefdelphi.com to the rescue!!!
Posted by Bill Beatty.
Other on team #71, Team Hammond, from Team Hammond.
Posted on 11/2/99 6:42 PM MST
In Reply to: Re: rules and chiefdelphi.com to the rescue!!! posted by Andy Grady on 10/28/99 11:28 AM MST:
Andy
I finally had a chance to look up the gear. It is 16 DP with 54 teeth, PD of 3.375 and a face width of 1/2'. I am not sure under last years rules if it would be legal to use a Boston gear for the fix. We used an aluminum round from Small Parts for the blank and cut the teeth in the rim. The web was offset to one side for bolting to the web of the original gear. Bill Beatty
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
I wonder if the kit motors run counterclockwise in the Southern Hemisphere? - Gary Dillard [more] 
23-06-2002, 22:07
Similar Threads
Threaded Mode