What is the maximum Number of motors allowed?

[borabora]

I cant find the maximum motor limit in the manual... Is there one?
All i found was

<R59> Additional motors specifically permitted on 2008 FRC ROBOTS include:
All motors, actuators, and servos provided in the 2008 Kit Of Parts,
HITEC HS-322HD servos,
FIRST Tech Challenge (FTC) servos (Innovation First part number 276-2162),
FIRST Tech Challenge (FTC) motors (Innovation First part number 276-2163),
One or two additional 2-1/2” CIM motors (part #FR801-001 and/or M4-R0062-12 in addition
to those provided in the Kit Of Parts. This means that up to four, and no more, 2-1/2” CIM motors can be used on the ROBOT.

This rule makes it seem like there is only a limit on the number of CIM motors you can use. So you can use as many other motors as you want?

[Bharat Nain]

All the motors that came in the kit only. No more. For CIM Motors, you are allowed a maximum of 4. Servos.. well you found the rule. Re-read the manual for more rules.

[borabora]

Thanks,

Then there is no set limit for the number of motors you can use, like there was last year. That is except for the CIM motors.

[Alex.Norton]

No, there is a limit, you can't use any more motors than are provided in the kit with the exception of two extra CIM motor. When it comes to servos there is no limit.

[Mike AA]

You can however use every single motor that came in the kit if you wish (and need)

-Mike

[Francis-134]

There is a definate limit to the number of motors one can use this year. To be clear, one robot can have only up to:

4 2.5" CIM Motors
2 Globe Motors
2 FP motors (this year's only!)
2 Keyang Window motors
1 Denso Window Motor
1 Van Door Motor
1 BaneBot ES-540 Motor
1 BaneBot ES-550
2 Small Mabuchi Motors

An unlimited number of HITEC HS-322HD servos, VEX Servos and VEX Motors (as designated by the part number in the manual).

[borabora]

Big thanks to everyone with the quick responses.
Now we know that we have enough motors for our claw design and drive train.