Using the IR remote to send radio commands to the robot

We are different, on purpose, for a reason. No one in FIRST should EVER forget that. - Rich Kressly [more]

		Chief Delphi > Technical > Control System
Using the IR remote to send radio commands to the robot

Thread Tools

Rate Thread

Display Modes

13-01-2008, 21:00

Mikhail_Pham Mikhail_Pham is offline

Registered User

no team

Join Date: Dec 2007

Location: Irvine

Posts: 8

Mikhail_Pham is an unknown quantity at this point

Using the IR remote to send radio commands to the robot

This sounds exploitive and probably illegal, but is it legal to use the robo coach to send IR signals to a robot operator control that would send radio commands to the radio receiver on the actual robot, eliminating any nasty bits about Ir signal strength during hybrid mode?

It would still only use 4 commands, but the signal strength would not be an issue.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using the IR Receiver on the Robot	LG67	Control System	1	06-01-2008 01:42
Where do I begin to get the robot to move using the camera?	Ianuser	Programming	10	16-02-2007 17:55
Programming the vex microcontroller to respond to commands on the serial port	crashoverride02	Programming	1	20-10-2006 14:17
Can the pic controller send the data to pc?	sunnyrx7turbo	Control System	2	05-08-2005 13:14

All times are GMT -5. The time now is 20:35.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.