Wiring the IR sensor board

[govvijay]

I am a rookie programmer on Team 540 and I was just wondering how to wire the IR board. I know that Pins 1-4 are used for either positive or negative power supply voltage inputs. Pins 5-8 are used for the output signals associated with the motorcoach remote buttons. 9 and 10 aren't used.

With the IR board there are the rainbow colored wire. How does each wire correspond to each pin? I see that there are 10 wires, but which wire matches with which pin?

Also, what do I connect the wires to? Do they connect directly on the Digital Controller?

Thanks for your help.