2007 CIM's in 2008?

[ahecht]

Originally Posted by Al Skierkiewicz

The rules in Rev B
<R58> Motors, pumps, and, Robot Controllers from previous robots shall not be used in addition to
those provided in the 2008 Kit Of Parts. They may be used as direct one-to-one SPARE
PARTS for those provided if the provided part fails or is damaged. They can only be used if
they are identical to the part being replaced.

<R59> Additional motors specifically permitted on 2008 FRC ROBOTS include:
 All motors, actuators, and servos provided in the 2008 Kit Of Parts,
 One or two additional 2-1/2” CIM motors (part #FR801-001 and/or M4-R0062-12 in addition
to those provided in the Kit Of Parts. This means that up to four, and no more, 2-1/2” CIM motors can be used on the ROBOT.

What that tells me is that you can use last year's CIM motors IF AND ONLY IF you did not use them on last year's robot.