A New Programmer

[Laaba 80]

Im not sure with Easy C, I use MP Lab. I'll tell you how its done in MP Lab, and hopefully you can figure Easy C out. In the Kit, you got some serial cables. plug the red cable into the robot controller and the operator interface with the joysticks. It says TEATHER where you put that in. Take the black cable and plug into the robot controller. I cant remember what the port says, but I'm guessing it says something like PROGRAM. If you are using a newer laptop you may run into some problems connecting to the computer because they dont have serial ports any more, let me know if that is your case. When everything is turned on press and hold the PROG button on the robot controller until some lights turn yellow. Open up the compiler, open up the hex file that you just built and download into the robot. Hopefully that helped. If there is any thing else let me know and I'll do my best to help.
Joey