|
|
|
 A good driver will always win over a good robot. - Mike Norton [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| A good driver will always win over a good robot. - Mike Norton [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
19-01-2008, 16:00
|
|||||
|
|||||
|
Re: How to download program to robot?
The short version:
1. Connect the robot. Use the programming cable (black) to connect the computer serial (RS-232) port to the programming port on the robot controller (RC) 2. Press the programming button on the RC, hold it for a few seconds until one of the lights turns orange (I think it's "Program state" but not sure. Robot turned on, of course!) 3 With the program open on the downloading computer, press F7. If it compiles OK, hit enter to download the program to the robot. If it does not compile OK, you have to fix that first. That's about it. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to upload/download the code from a robot? | Team865 | Programming | 3 | 06-11-2007 17:03 |
| How Can I Program The FRC Robot Controller To Display My Team Number | jesusescobar | Programming | 5 | 22-01-2007 10:29 |
| program download question. | Tachion | Technical Discussion | 1 | 27-10-2005 10:49 |
| program download problem | zdeswarte | Programming | 5 | 23-03-2005 06:46 |
| Crashing on program download | Ryan M. | Programming | 3 | 01-02-2005 21:15 |
Threaded Mode