Help--Program Light Stuck

[eugenebrooks]

Originally Posted by NinJA999

We were working on downloading code, and it got stuck in Program mode. We reset the robot, and the program light is still orange. Whatever we do (shut it off, reset it, reset from the oi, etc.), it will not go out of this mode. And it will not accept any programs. Help!

This may, or may not, be your fault, but there is a fault
where the program light is stuck but it isn't really in program
mode. Hold down the program button for four seconds,
no lights will change, and then give it a try. We have had
this happen to us in the past and this was the cure.

Eugene