|
|
|
 When you're in a field as deep as the Championship go offensive or go home. It's that simple. - thefro526 [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| When you're in a field as deep as the Championship go offensive or go home. It's that simple. - thefro526 [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
problem connecting the solenoid
hi guys... we r using the pneumatics for the first time and we are facing some technical problems.... we can't figure out that How we attech the single switch solenoid to the circuit....coz we can not find any point on the solenoid where we can attach the wire...so if u guys can help us figuring it out....thanks
 |
|
#2
21-01-2008, 08:47
|
||||
|
||||
|
Re: problem connecting the solenoid
If you are talking about the SMC valve then black is for ground and red would go to a spike relay. You could connect both to the relay if you have no need to use the other output on the relay.
If you are talking about the Festo valve, you need to wire it yourself. The connector is included in the box. 1- Negative(ground) 2- Positive (spike) 3- not used. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mounting / Connecting The Fisher Price Motor | Xufer | Motors | 21 | 31-01-2006 20:16 |
| gear tooth sensor connecting problem | nirty | Electrical | 2 | 23-01-2006 12:17 |
| connecting CMUCam2 with a PC without the RC | winners | Programming | 1 | 13-01-2006 20:16 |
| Connecting the controller | Max Brin | Technical Discussion | 1 | 12-01-2006 11:24 |
| connecting to the battery | ahecht | Technical Discussion | 1 | 25-01-2002 17:15 |
Linear Mode
